Table of Contents
Advertisement
To change the baud rate or to reset it to "auto-
baud," type 2 and then press ENTER at the
Main Menu.
The following screen displays on your PC's
monitor:
Select the desired baud rate:
0. Quit
1. 9600 Baud
2. 19.2 K Baud
3. 38.4 K Baud
4. Autobaud (default)
Enter [0, 1, 2, 3, or 4]:
8. Change the communication port, if necessary.
Choose this option from the Main Menu only
if you have connected the download cable to
your PC's COM2 serial port instead of to
COM1. To change the port, type 3 at the
Main Menu and press ENTER. The program
will toggle between COM1 and COM2 every
time you choose this option.
9. Change the ROM image file names, if
necessary.
Select option 4 on the Main Menu to change
the ARC (application) file name you specified
earlier. Your PC prompts you for the new
ROM image file name. Type in the new path
and file name and press ENTER.
To leave this screen without changing the file
name, press the ESC key.
To remove a file name from a list of ROM im-
age files, press ENTER at the prompt. The
program verifies that you want to omit this
file before returning to the Main Menu.
45
Advertisement
Table of Contents
