Scanning A Bar-Code - Symbol PTC-960X User Manual

toward. Quickly center the aiming dot over
the bar code. Keep pressing the trigger, and
the laser begins scanning the bar code.
3. Watch the line of light made by the scanner
as it scans the bar code. The line must pass
over all of the bars on the label for the bar
code to be read.
4. If the scan has been successful, the green
Good Scan LED on the rear face of the PTC
blinks once, and you should hear a beep. The
LED does not light if the scan has not been
successful.
FIGURE 3

Scanning a bar-code

35