Download  Print this page

Solution; Explorer Apps; Linear Explorer And Quadratic Explorer Apps - HP Prime Graphing Calculator Quick Start Manual

Hide thumbs



1. If necessary, tap
to set the angle measure to degrees.
2. Enter a = 9, b =6, and B = 30.
3. Tap
to see the result.
The length of the third side is shown as c =11.76... Angles A and C are also calculated.
Note that in this case, there is a second
solution, indicated by the presence of a new
menu item:
. Tap
to see the
second solution: c = 3.825... Press
again to see the earlier result.
Solution 1
Solution 2

Explorer apps

Explorer apps are designed for you to explore linear, quadratic, and trigonometric functions. Various functions and their
associated graphs are shown. You can change the parameters of a function and immediately see how the graph of that
function changes. You can also change a graph and immediately see the change in the parameters of the corresponding
equation. You can then test your skill at matching functions with graphs.

Linear Explorer and Quadratic Explorer apps

The Linear Explorer app gives you an opportunity to explore the behavior of graphs of the form y=ax and y = ax + b as the
values of a and b change. The Quadratic Explorer app is very similar. With it you can explore the behavior of y = a(x + h)
+ v
as the values of a, h, and v change. In both apps you can change the equation and note the change in the graph, or change
the graph and note the change in the equation. You can change a graph using the change keys. You can also translate a graph
by tapping it and then dragging it.
To open the Linear Explorer app (or Quadratic Explorer app), press ! and select Linear Explorer (or Quadratic Explorer).
Since these apps are very similar, both will be treated together in this section (with the Quadratic Explorer app used as the
Quick Start Guide


Table of Contents

   Also See for HP Prime Graphing Calculator

   Related Manuals for HP Prime Graphing Calculator

This manual is also suitable for:

Hp prime graphing calculator

Comments to this Manuals

Symbols: 0
Latest comments: