Assembly Instructions - Masport SUPREME W 210 Owner's Manual

For Models With Rotisserie - Assembly Instructions
Tools needed for assembly
Crosshead screwdriver, 10mm A/F spanner, 2x 8mm A/F Spanners.
18. Assemble the Prong (24), the Rod-A (25), the Rod-B (26) and the Guide (27), the Rotisserie handle (28) together as in the diagram.
Note!
Rotisserie Rod 26 is threaded LH, assemble by turning rod anti-clockwise. Tighten with
remain spanner tight.
25
Assemble the Motor holder (29) to the appliance with 2pcs Screw M6*10 (a), 2 fibre washer (c) and 2pcs Nut M6 (f) as the
diagram. Place the battery (31) into the Motor (30). Assemble the Motor and Rotisserie to the appliance as the picture.
Note!
Take note of the battery + - positions prior to fitting the batteries.
Note! There is an option to use a mains adaptor (not stocked). Requires:
Mains adaptor 240 volt > 3 volt DC 3 milliamps or greater.
Note!
For 210 models without a Rotisserie, there is an option to purchase 559218 Rotisserie Set-210.
The 210 Series of BBQ has the option of being converted to natural gas. This conversion must be actioned by a certified agent using a
Masport NG conversion kit.
The certifying agent (usually a gas fitter or gas plumber) will update the information on the data plate to keep the barbecue compliant with
local regulations.
24
26
Screw M6*12
Fibre washer
Nut M6
29
30
Natural Gas Conversion
27
28
Place inside of grill
8mm A/F Spanners. This connection must
Rotisserie
15