Masport SUPREME W 210 Owner's Manual page 8

Step 4.
Step 5.
Step 6.
9. Assemble Left door (item 10) and Right door (item 11) using 4pcs Screw M6×12 (item a), 4 Handle brackets (item 12) and 2 Handles
(item 13), then assemble the door assemblies as the picture.
12
10
8
Assemble the door panel to the side panels of the cabinet using 2 xM6 x12 (item a) screws each side. Keep
the screws loose.
Door Panel
Assemble the door panel and the top cabinet panel using 4 xM6 x12 screws (item a). Keep the screws loose.
Once all the parts mentioned above are assembled tighten all the screws.
13
Side Panel
Cabinent
Note!
To keep screw slot against screwdriver pass screw
through ribbon of plastic, hold both together,
assemble screw to handle, remove plastic, and re-
use for other three screws.
Screw M6*12
M6*12
Note!
Once the cabinet has been fully assembled, and
11
the doors open and close correctly with even
clearances top and bottom, and side to side, the
screws can now be fully tightened.