DuraLabel LabPRO User Manual page 32

To Change the Automatic Cutter Setting:
You can change the automatic cutter settings without going back into the printer
driver.
Go to File >> Print , then click on the Properties button next to DuraLabel LabPRO.
®
Choose the Stock tab.
A new dialog will open which allows you to change the cutter options.
If you do not want to cut between labels select None under Media Handling next
to "Post-Print Action." If you want to cut between labels, select Cut and next to
"Occurrence" select After Every Page.
Click Apply then click OK in the Properties dialog box to save your new settings.
-30-