Install Using Usb Cable - DuraLabel LabPRO User Manual

Install Using USB Cable

The following instructions (pages 18-19) are only for those using a USB Cable.
Skip to page 20 of the User's Guide if installing manually.
IMPORTANT! You must have IT administrator privileges in order to install
driver.
IMPORTANT! If you are upgrading from any existing DuraLabel
the previous driver will need to be uninstalled. Please see the inside cover
of the QuickStart Guide for instructions.
A Found New Hardware dialog box may appear. If so, select No, not this time.
Insert the DuraLabel
software automatically and click Next. (This step may run automatically.)
-18-
LabPRO CD into the CD-ROM drive. Select Install the
®
installation
®