Toshiba e-Studio 162 Service Manual page 168

5) Select [Specify a location] and press <Next> button.
6) Select [Include this location in the search;]. If the search location is
not the folder which includes the maintenance tool driver
(Mainte.inf), select <Browse>. If the search location is the folder
which includes the maintenance tool driver, press <Next> button to
go to procedure 9).
7) Specify the folder which includes the maintenance tool driver
(Mainte.inf), and press <Open> button.
e-STUDIO162/162D/151/151D FIRMWARE DOWNLOAD PROCEDURES 15 - 7
8) Check that the path to the folder which includes the maintenance
tool driver (Mainte.inf) is displayed, and press <OK> button.
(Suppose that the maintenance tool driver is included in
C:\MaintenanceTool\Drivers\2kXp folder.)
9) Press <Next> button to start installation.
10) When the following display is shown, installation is completed.
Press <Finish> button.
11) Restart the PC.
With the above procedures, installation (on Windows 2000) of the inte-
gration maintenance program is completed.