Toshiba e-Studio 162 Service Manual page 100

Main Sub
Contents
code code
64 01 Self print (1by2 mode)
(SELF PRT.)
66 01 FAX soft SW setting
(Executable only when the
FAX is installed.)
02 FAX soft SW initializing
(excluding the adjustment
values) (Executable only
when the FAX is installed.)
[Function]
The status of the optical section is ignored and printing of one page is made. Also when the print com-
mand is received from the host, printing is made.
When this test command is executed, warm-up is performed and the ready lamp is lighted. (Since,
however, the scanner is disabled, initializing is not made.)
Enter the code number and press [OK (ENTER)/START] key to start paper feed from the selected
cassette and print in the selected pattern.
Code number
0
1
2
3 Black background
∗
For 4 – 99, flip.
[Operation]
The operation is similar to test command 21-01.
[Function]
Use to check the FAX soft SW setting.
Every time when the key is pressed, the bit on the first line is switched 0 and 1.
[Operation]
1) Initial display
ENTER FAX SOFT SW. #
(3 DIGITS)
∗
[CLEAR] key: FAX control is terminated.
2) Enter a 3-digit value of soft SW No. (To
enter the fourth digit, shift to the left.), and
the press [OK (ENTER)] key.
No.### xxxxxxxx
CHANGE? 1:YES 2:NO
"xxxxxxxx" is the set content.
∗
Select 2: Returns to the soft SW No. entry dis-
play.
[Function]
Use to initializing FAX soft SW.
[Operation]
1) Initial display
INITIALIZED
After 2sec, FAX control is terminated.
e-STUDIO162/162D/151/151D TEST COMMAND, TROUBLE CODES 10 - 31
Details of function/operation
Pattern Display item
1by2 1 BY 2
Grid pattern CHECK
White paper WHITE
BLACK
SW.___
3) Select 1
No.### xxxxxxxx
USE # KEY 12345678
4) Change with 1-8 of [10KEY] and the press
[OK (ENTER)] key.
No.### xxxxxxxx
STORED? 1:YES 2:NO
"xxxxxxxx" is the set content.
∗
Select 2: Returns to the soft SW No. entry dis-
play.
5) Select 1
STORED
After 2sec, returns to "1) Initial display".