C. Assembly Procedure - Toshiba e-Studio 162 Service Manual

32) Remove the screw and the E-ring, and remove the PS semi-circu-
lar earth plate and the PS roller unit.
33) Remove the E-ring and remove the spring clutch from the PS roller
unit.
4) 4)
PS roller unit
PS semi-circuler
PS semi-circular
earth plate
earth plate
2) 2)
3) 3)
34) Remove three screws and remove the TC front paper guide.
2)
35) Remove the screw and the connector, and remove the PPD1 sen-
sor PWB.
1)
2)
5) 5)
Use grease of
Floil FG40H
only to apply to
this section.
4) 4)
1) 1)
1)
e-STUDIO162/162D/151/151D DISASSEMBLY AND ASSEMBLY 8 - 14
36) Remove two E-rings and remove the paper feed roller.
37) Remove three E-rings and remove the clutch unit.
5)
Clutch unit
Paper feed
roller
4)
3)
38) Remove the semi-circular roller unit.
39) Remove the semi-circular rubber.
1)

C. Assembly procedure

For assembly, reverse the disassembly procedure.
Back
4)
Front
1)
2)
2)
1)