Call Pickup - Group; Call Park - NEC Univerge SV8100 User Manual

1.
Call Pickup – Group
This method permits a station user to answer any calls
directed to other extensions in their preset pickup group
by dialing a Call Pickup – Group feature access code.
Ringing telephone in your Call Pickup Group:
1. Lift the handset.
2. Dial 756 or *#.
Service Code *# can pick up any call in the
Note:
group, plus any Ring Group calls. Service Code
756 cannot pick up Ring Group calls.
Ringing telephone in another Pickup Group when
you do not know the group number:
1. Lift the handset.
2. Dial 769.
To answer a call ringing a telephone in another
Pickup Group when you know the group number:
1. Lift the handset.
2. Dial 768 and the group number (1~9 or 01~64).

Call Park

To Park a Call in a System Orbit:
You can park Intercom or trunk calls.
Note:
1. Press Hookswitch or Flash Key.
2. Dial #6 and the Park orbit (01~64).
If you hear busy tone, the orbit is busy. To try
Note:
another orbit, press the hookswitch twice and
repeat the second step.
3. Use Paging to announce the call.
4. Replace the handset.
If not picked up, the call will recall to you.
Note:
To Pickup a Park Call:
1. Lift handset.
2. Dial *6 and the Park orbit (01~64).
10