Temporary Memory; Call Pickup; Group Call Pickup - NEC UNIVERGE SV9100 User Manual

Temporary Memory

An unanswered call will cause the Call History key
(Service Code 751:08) to flash, indicating a new call
has been placed in the temporary memory. If enabled
in programming, the telephone's display will show:
"Check List".
Line 001
NEC America 2142622000
Conf Dir
(1) Press the Call History key (Service Code
751:08) or press the LIST Softkey and CID.
Note: The last addition to the list is displayed.
(2) Press the Arrow Down Softkey to scroll through
the list of numbers in memory.
(3) Press the DEL Softkey to delete the entry and
scroll to the next entry.
(4) The Call History key will remain on as long as
entries remain in memory.
(5) To place a call back to a number in the temporary
memory list, with the number to be dialed
displayed, press a Line or the Speaker key.
Note: The outgoing call is placed.
2-14 THU 4:32PM
12345678
Conf Dir
LIST MENU
Redial CID
ICM Prog
ICM Prog

CALL PICKUP

Group Call Pickup

To answer a call ringing another telephone in your
Pickup Group:
(1) Pick up the handset or press the Speaker key.
(2) Press the Group Call Pickup key (Service Code
751:24).
-OR-
(1) Dial 756 or *#.
Note: Service Code *# can pick up any call in the
group, plus any Ring Group calls. Service Code 756
cannot pick up Ring Group calls.
2-14 THU 4:32PM
Call P/U
Conf
To answer a call ringing a telephone in another Pickup
Group when you do not know the group number:
(1) Pick up the handset or press the Speaker key.
(2) Press the Group Call Pickup key (Service Code
751:25).
-OR-
(1) Dial 769.
31
STA 87654321