Conference; Barge-In; Tone Override; To Send Off-Hook Signals When Calling A Busy Telephone - NEC Univerge SV8100 User Manual

1.

Conference

With a call in progress:
1. Press the Hookswitch or Flash Key and dial #1.
2. Dial the party you want to add and wait until they
answer.
3. Press the Hookswitch or Flash Key and repeat
the second step to add more parties.
-OR-
Press the Hookswitch or Flash Key twice to set
up the Conference.

Barge-In

Barge-In permits an extension user to break into
another extension user's established call, including
Conference calls.
To Barge-In without first calling the busy
extension:
1. Lift the handset.
2. Dial 710.
3. Dial the busy extension.
To Barge-In to a Conference Call:
1. Lift the handset and dial the service code (default
= 710).
2. Dial the extension number.
When a new call is added to the conference, an
Note:
intrusion tone is heard by all parties in the
Conference, depending on system
programming, and all display multiline
terminals show the joined party
3. Dial the extension number of the internal party.
-OR-
Dial the single-digit service code or the service
code 710.

Tone Override

To Send Off-Hook Signals when Calling a Busy
Telephone:
1. Dial *.
-OR-
Dial 709. You hear Ring Busy Tone. The called
extension hears Call Alert Notification.
By default, your extension will send off-hook
Note:
signals automatically.
To To Answer Tone Override:
1. Receive Tone Override.
2. Hang up the handset.
3. Answer the incoming call and talk with the party.
11