Part Identification Chart - Pro-Form 440R User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M5 x 8mm M5 x 10mm M8 x 20mm M10 x 52mm
Screw (12)–4 Screw (101)–1 Screw (14)–2 Screw (46)–2
M8 Acorn
M8 Split
M8 x 20mm M10 x 20mm M13 x 22mm
Nut (31)–4
Washer (15)–4
Washer (16)–6
Washer (47)–2 Washer (33)–2
M13 x 32mm
Washer (88)–1
6