Assembly - Pro-Form 440R User Manual

ASSEMBLY

• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
• To identify small parts, see page 6.
1. Go to www.proformservice.com/registration
on your computer and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have Internet access, call
Customer Care (see the front cover of this
manual) and register your product.
2. Orient the Front Stabilizer (50) as shown.
Attach the Front Stabilizer (50) to the Frame (39)
with two M10 x 52mm Screws (46) and two M10
x 20mm Washers (47).
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
• Assembly requires only the included tools.
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
47
46
7
39
50