Installation Options - CyberData V3 Configuration Manual

3.0 Installation Options

This section describes two possible types of paging using a CyberData V3 Paging Server in a
RingCentral installation:
• IP Paging
• IP to Analog Paging
Each solution is an example and not an exhaustive list of all possible installation options. It is
common to install a V3 Paging Server for the purpose of aggregating multicast-supported IP
phones, IP paging devices, and analog paging equipment or any combination thereof.
The CyberData V3 Paging Server offers a robust feature set by serving both IP and analog pages
to a combination of multicast-enabled IP paging endpoints in addition to legacy analog
amplifiers and zone controllers that may already be installed in a particular location. The V3
Paging Server facilitates a versatile and scalable overhead paging solution.
IP Paging is supported by accepting audio from a SIP call and serving the page as a multicast to
up to 100 configurable multicast addresses. Each group, consisting of a unique multicast address
and port number, can be password controlled for added security. Page menu options are voice
prompted and can be selected by entering digits into your RingCentral IP phone.
Additionally, the V3 Paging Server supports Polycom Group Paging mode and can transmit
multicast pages to Polycom IP phones using UC Software 4.0.0 and higher.
When a multicast page is sent to the multicast-enabled endpoints on the network in a page group,
such as CyberData IP speakers and paging amplifiers, you may also forward the group page to
the analog Page Port and RCA Line Level outputs connected to legacy analog amplifiers and
zone controllers. The V3 Paging Server also supports dry relay contacts for contact closure to
initiate a page where required for Page Port or RCA Line Level input connections to analog
devices.
Our VoIP Technical Support team maintains a matrix of compatible analog amplifiers on our
website that you may use to verify compatibility and view/download sample wiring diagrams for
connections from a V3 Paging Server. The CyberData "Connecting to Compatible Analog
Amplifiers" matrix is available on our website here:
http://www.cyberdata.net/support/devicecompatibility/index.html
You are more than welcome to
verifying connections from a V3 Paging Server to a specific analog amplifier or zone controller
before purchasing your device.
RING CENTRAL CONFIGURATION GUIDE: V3 PAGING SERVER
Contact CyberData VoIP Technical Support
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931042C Page 6
for assistance with