CyberData V3 Configuration Manual page 22

Paging server

Hide thumbs Also See for V3:

Table of Contents

RING CENTRAL CONFIGURATION GUIDE: V3 PAGING SERVER

Doc. 931042C

Page 21

Autoprovisioning

If you are autoprovisioning the paging server, use the SIP Settings in the autoprovisioning

template to register the paging extension with RingCentral.

An autoprovisioning template is provided in the respective firmware folder available on the

Downloads tab of the product webpage here:

http://www.cyberdata.net/products/voip/digitalanalog/ceilingspkr2/downloads.html

Be sure to use the autoprovisioning template for the firmware version running on the paging

server. The firmware version can be verified on the

Home page of the web

interface.

Refer to the Operations Guide for instructions on autoprovisioning configuration.

Figure 5-13. Autoprovisioning Template Example – SIP Settings

CyberData Corporation

3 Justin Court, Monterey, CA 93940

www.cyberdata.net

P 831.373.2601 | F 831.373.4193

Table of Contents

Need help?

Do you have a question about the V3 and is the answer not in the manual?