Devices - CyberData V3 Configuration Manual

Note: These example values are published only for reference. The SIPAuthPassword
value should be the actual value from the
popup window.
Verify the Paging Extension is Registered
After the paging server has rebooted and initialized, refresh the
Your device should show as
Home Page of the web interface as well as at the top of the SIP Configuration page next to
Enable SIP Operation. See
Additionally, you may verify the paging extension is registered with RingCentral through the
admin portal. From the Phones & Devices menu, select User Phones and the IP Phone you just
created for the paging extension. The status should show as "online" in the Device Details.
Make a Test Call
Once your paging extension has registered with RingCentral, you may use any RingCentral
phone to dial the paging extension.
RING CENTRAL CONFIGURATION GUIDE: V3 PAGING SERVER
Assisted Generic IP Phone Provisioning
[Registered with SIP Server]
Figure 5-11 and Figure
Figure 5-14. Device Details – Status
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931042C
Home page of the web
in green text on the bottom of the
5-12.
Page 22
interface.