Configuration Procedure: Paging Extension - CyberData V3 Configuration Manual

RING CENTRAL CONFIGURATION GUIDE: V3 PAGING SERVER
Doc. 931042C Page 12

5.0 Configuration Procedure: Paging Extension

When integrating with RingCentral, the paging server must be provisioned as an IP phone
associated with a user extension. Provisioning as a Paging Device does not allow the caller to
receive audio from the paging server to hear voice prompts from the page menu or enter DTMF
digits for page menu selections, group passwords, or pass-through to an analog amplifier or zone
controller for analog zone control.
Add an IP Phone
This section describes the process of creating a user, provisioning an IP phone, and registering
the paging extension that you will use for paging with RingCentral. First, you must designate a
RingCentral User for the paging server.
Use the following steps to create a user and provision an IP phone for the paging extension
through the RingCentral Admin Portal.
1. Login to the RingCentral Admin Portal at https://service.ringcentral.com.
Figure 5-1. RingCentral Admin Portal Login
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193