Transmitter Settings - ROBBE ARROW PLUS TRAINER EVOLUTION Operating Instructions Manual

Transmitter settings Mode 1
Throttle trim:
If the rotor starts to move without you
touching the throttle stick, or does not
respond to stick movements, you need
to adjust the throttle trim until the rotor
is stationary.
Tail rotor trim
If the model's nose turns to right or left
when it lifts off, adjust the tail rotor trim
buttons to correct the rotation until the
model maintains a stable heading.
Pitch-axis trim:
If the model flies forward or back when
it lifts off, adjust the pitch-axis trim until
it hovers over one point.
Roll trim:
If the model moves bodily to left or right
when it lifts off, adjust the roll trim until
the model remains in a stable hover.
Operating Instructions, ARROW PLUS TRAINER EVOLUTION RTF 2.4 GHz No. S2521
Transmitter settings Mode 2
Throttle trim:
If the rotor starts to move without you
touching the throttle stick, or does not
respond to stick movements, you need
to adjust the throttle trim until the rotor
is stationary.
Tail rotor trim:
If the model's nose turns to right or left
when it lifts off, adjust the tail rotor trim
buttons to correct the rotation until the
model maintains a stable heading.
Pitch-axis trim:
If the model flies forward or back when
it lifts off, adjust the pitch-axis trim until
it hovers over one point.
Roll trim:
If the model moves bodily to left or right
when it lifts off, adjust the roll trim until
the model remains in a stable hover.
11