StarTech.com NETRS232 Instruction Manual page 9

1 port rs232 serial over ip device server

Hide thumbs Also See for NETRS232:

Table of Contents

3. If required, allow access to the software through the Windows Firewall by clicking

the "Allow access" button.

4. Once the device is found, configure the PC to the same IP domain by clicking the

"Configure" button. The default IP address of the device is "192.168.1.1".

Note: The default Gateway Address is "192.168.1.254".

5. In the "Input Attributes" dialog, enter the following:

• Account Name: admin

• Password: 00000

6. Once the device is connected, the "Configure Dialog" will open to set your desired

IP settings.

Instruction Manual

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the NETRS232 and is the answer not in the manual?