Table of Contents
Advertisement
TCP/IP Network Setup
In the default configuration, AMG-2000 will assign an appropriate IP address to a client PC which uses DHCP to
obtain IP address automatically. Windows 95/98/2000/XP configures IP setup to "Obtain an IP address
automatically" in default settings.
If you want to check the TCP/IP setup or use a static IP to connect to AMG-2000 LAN port, please follow the
following steps:
Check the TCP/IP Setup of Window 9x/ME
1. Choose Start > Control Panel > Network.
2. Choose "Configuration" label and select "TCP/IP >
AMD PCNET Family Ethernet Adapter (PCI-ISA)",
and then click Properties. Now, you can choose to
use DHCP or specific IP address.
3-1. Using DHCP: If you want to use DHCP, please
choose "Obtain an IP address automatically" on
the "IP Address" label and click OK. This is also
the default setting of Windows. Then, reboot the
PC to make sure an IP address is obtained from
AMG-2000.
132
Advertisement
Table of Contents
