Table of Contents
Advertisement
LAN Interface Setting: Click LAN to enter the LAN Settings page. Input the data of LAN including IP
Address, Subnet Mask and Default Gateway of the AP.
Wireless Interface Setting: Click Wireless LAN to enter the Wireless Interface Setting page. The data of
Properties and Security need to be filled in.
Properties
SSID:
The SSID is the unique name shared among all APs in a wireless network. The SSID must be the
same for all APs in the wireless network. It is case sensitive and has a maximum length of 32 bytes.
SSID Broadcast:
the network, you may want to enable this function, but make sure to disable it when you finished. With
this enabled, someone could easily obtain the SSID information with the site survey software and get
unauthorized access to your network. With this disabled to increase network security and prevent the
SSID from being seen on networked.
Channel:
Select the appropriate channel from the list to correspond with your network settings; for
Select this option to enable the SSID to broadcast in your network. When configuring
88
Advertisement
Table of Contents
