Table of Contents
Advertisement
hyperlink to get into the Radius Client Configuration list for further configuration. In the Radius Client
Configuration table, the clients, which are using 802.1X as the authentication method, shall be put into this
table. AMG-2000 will forward the authentication request from these clients to the configured Radius Servers.
Trans Full Name: When enabled, the ID and postfix will be sent to the RADIUS server for authentication. When
being disabled, only the ID will be sent to RADIUS server for authentication.
NASID: Enter a line of characters, for example "meeting-room", for identifying AMG-2000 itself to the RADIUS
server. Please use numbers (0 to 9), alphabets (a to z or A to Z), dash (-), underline (_) and dot (.), and all other
letters are not allowed.
Server IP: Enter the IP address/domain name of the RADIUS server.
Authentication Port: Enter the authentication port of the RADIUS server and the default value is 1812.
Accounting Port: Enter the accounting port of the RADIUS server and the default value is 1813.
Secret Key: Enter the key for encryption and decryption.
Accounting Service: Select this to enable or disable the "Accounting Service" for accounting capabilities.
Authentication Protocol: There are two methods, CHAP and PAP for selection.
47
Advertisement
Table of Contents
