Table of Contents
Advertisement
Check the TCP/IP Setup of Window 2000
1. Select Start > Control Panel > Network and Dial-up Connections.
2. Click the right button of the mouse on "Local Area
Connection" icon and then select "Properties".
3. Select "Internet Protocol (TCP/IP)" and then click
Properties. Now, you can choose to use DHCP or
specific IP address, please proceed to the following
steps.
4-1. Using DHCP: If want to use DHCP, please choose
"Obtain an IP address automatically" and click OK.
This is also the default setting of Windows. Then,
reboot the PC to make sure an IP address is obtained
from AMG-2000.
4-2. Using Specific IP Address: If you want to use
specific IP address, you have to ask the network
administrator for the information of the AMG-2000: IP
address, Subnet Mask, New gateway and DNS
134
Advertisement
Table of Contents
