Table of Contents
Advertisement
4.1.6. Private LAN Configuration
To access the network through the private LAN port doesn't have to authenticate before logging in. In this section,
you can set the related configuration for the private LAN port and DHCP server.
Private LAN
Operation Mode: Choose one of the two modes, NAT mode and Router mode, by the requirements.
IP Address: Enter the desired IP address for the private port.
Subnet Mask: Enter the desired subnet mask for the private port.
DHCP Server Configuration
There are three methods to set the DHCP server: Disable DHCP Server, Enable DHCP Server and Enable
DHCP Relay.
1. Disable DHCP Server: Disable DHCP Server function.
2. Enable DHCP Server: Choose "Enable DHCP Sever" function and set the appropriate configuration for
the DHCP server. The fields with red asterisk are required. Please fill in these fields.
31
Advertisement
Table of Contents
