Table of Contents
Advertisement
Server Name: Set a name for the server using numbers (0 to 9), alphabets (a to z or A to Z), dash (-),
underline (_) and dot (.) with a maximum of 40 characters, all other letters are not allowed.
Sever Status: The status shows that the server is enabled or disabled.
Postfix: Set a postfix that is easy to distinguish (e.g. Local) for the server using numbers (0 to 9), alphabets (a
to z or A to Z), dash (-), underline (_) and dot (.) with a maximum of 40 characters, all other letters are not
allowed.
Black List: There are 5 sets of black lists. You can select one of them or choose "None". Please refer to 4.2.2
Black List Configuration for more information.
Authentication Method: There are 5 authentication methods, Local, POP3, Radius, LDAP and NTDomain
to configure from. Select the desired method and then click the link besides the pull-down menu for more
advanced configuration. For more details, please refer to 4.2.1 Authentication Configuration.
Notice: Enabling two or more servers of the same authentication method is not allowed.
Policy: There are 8 policies to choose from to apply to this particular server.
35
Advertisement
Table of Contents
