Local User: Add User
A new user can be added to the local user data
base. To add a user here, enter the Username
(e.g. test), Password (e.g. test), MAC (optional,
to specify the valid MAC address of this user) and
assign it a policy (or use the default). Click the
ADD button to add the user. You can add multiple
users in this page.
Attention: The policy selected in this step is
applied to this user only. Per-user policy setting
takes over the group policy setting at precious
step unless you select None here. Click Next to
continue.
POP3 User: POP3
Enter IP/Domain Name and server port of the
POP3 server provided by your ISP, and then
choose enable SSL or not.
Click Next to continue.
RADIUS User: RADIUS
Enter RADIUS server IP/Domain Name,
authentication port, accounting port and secret
key. Then choose to enable accounting service or
not, and choose the desired authentication
method.
Click Next to continue.
15