Table of Contents
Advertisement
example, 1 to 11 channels are suitable for the North America area.
Transmission Mode:
and Mix mode (b and g).
Transmission Rate:
transmission should be set depending on the speed of your wireless network. You can select from a
range of transmission speed or you can keep the default setting, Auto, to make the Access Point
automatically use the fastest rate possible.
CTS Protection:
The default value is Disable. When select "Enable", a protection mechanism will
decrease collision probability when many 802.11g APs exist simultaneously. However, performance of
your 802.11g APs may decrease.
Fragment Threshold: Breaking a packet into smaller units when transmitting over a network medium
that cannot support the original size of the packet.
Beacon Interval (ms): Enter a value between 20 and 1000 msec. The default value is 100 milliseconds.
The entered time means how often the beacon signal transmission between the access point and the
wireless network.
Preamble Type: The length of the CRC (Cyclic Redundancy Check) block for communication between
the Access Point and roaming wireless adapters. You can select either Short Preamble or Long
Preamble.
IAPP: Inter Access-Point Protocol is designed for the enforcement of unique association throughout a
ESS (Extended Service Set) and for secure exchange of station's security context between current
access point (AP) and new AP during handoff period.
Security: There are four kinds of security type, WEP, WPA, WPA2 andWPA2 MIXED for selection.
Disable: Choose this type, there is no any encryption used but 802.1x Authentication and
Authentication Type. For Authentication Type, you can choose Open System, Shared Key or Both
according to the settings of the AP and Client. Check 802.1x Authentication to enable this function and
enter the related data, if necessary.
WEP: WEP uses an encryption key that automatically encrypts outgoing wireless data. On the receiving
side, the same encryption key enables the computer to automatically decrypt the information so it can
There are 3 modes to select, 802.11b (2.4G, 1~11Mbps), 802.11g (2.4G, 54Mbps)
The default is Auto. Available range is from 1 to 54Mbps. The rate of data
89
Advertisement
Table of Contents
