Table of Contents
Advertisement
Rule Item: This is the rule that you have selected.
Rule Name: The rule name can be changed here. The rule name can be set to easily identify, for
example: "from file server", "HTTP request" or "to web", etc.
Enable this Rule: After checking this function, the rule will be enabled.
Action: There are two options, Block and Pass. Block is to prevent packets from passing and Pass is to
permit packets passing.
Protocol: There are three protocols to select, TCP, UDP and ICMP, or choose ALL to use all three
protocols.
Source MAC Address: The MAC address of the source IP address. This is for specific MAC address
filter.
Source/Destination Interface: There are four interfaces to choose, All, WAN1, WAN2, LAN1~4 and
53
Advertisement
Table of Contents
