Thanks for your purchasing Lumina Strip lighting equipment, which is available in Warm White (WW) version. The Lumina Strip is compatible of both DMX & RDM and with 10 channel LED intensity adjustable. Programs can be updated via RDM interface. It is available in master and slave control connection.
Lumina Strip Accessories(Included): 1. The unit power cable (1pcs) 2. Wing screw(2pcs) + Grommet(2pcs) + Washer(2pcs) 3. Mounting Assemble(2pcs) MAIN FEATURES 07, 08, 10,11, 16 DMX Channels selection Standard DMX 5-pin In/Out 16 built-in programs except for Auto & Full subject to Speed and Dimmer...
Maximum amount of this units that may be connected is 16pcs(AC100-120V) or 32pcs(220-240V). One universe DMX can drive up to 32 pcs of Lumina Strip, please add DMX booster if Lumina Strip are connected together in line over 32 pcs or data cable over 100M. The connections may be illuminated as following.
Lumina Strip LCD Display / Menu System Power indicator POWER LCD Display RDM/DMX RDM/DMX indicator MODE MENU DOWN Mode Key Down Key Menu Key Up Key Lumina Matrix LED Menu Tree...
OPERATION MODES The “Lumina Strip” has two different operation modes. It can be used as a 07, 08, 10,11, 16 channel DMX dimmer. Tap “Mode” button to switch the operation mode between “Receive Mode” and “Chase Mode”. Please follow illustrations below to operate the unit in your desired mode.
Page 8
Lumina Strip DMX Channel Details 8 Bit 7 Channel Configuration Master Master Dim Program Program LED 1-10 Programs Dim Mode Dimmer Fine Speed Fade Standard(dr 1) 0-20 16-bit 0-255 0-255 0-255 0-255 0-255 0-255 Stage (dr 2) 21-40 TV (dr 3)
Lumina Strip Program Mode: Use the operation mode only when you are about to use your unit as a channel chaser among of the 07, 08, 10, 11,16 channel chasers. The unit has 16 built-in programs except for Auto and Full. Of course, you can select any of these programs to chase for a more dramatic lighting show, and you can also control the speed at which the set programs will be chased.
Page 13
Lumina Strip Lumina Strip RDM Parameter IDs The following tables outline and describe all the RDM parameters IDs associated with Lumina Strip. Table 1: Lumina Strip RDM Parameter IDs Lumina Strip Elation lighting Lumina Strip LED Light...
Page 14
Lumina Strip Channel Parameter details: Functions Parameters value 0---100% Dimmer equal to intensity 0 100% DMX 0 7 for local DMX Dimmer Mode 15 Full DMX 8 DMX 16 23 Program1 DMX 24 31 Program2 Program DMX 32 39 Program3 …...
Page 16
Lumina Strip Table 2: Lumina Strip Manufacturer Status IDs Manufacturer Defined Status IDs Manufacturer Specific messages are in the range of 0x8000 —0xFFDF. Each Manufacturer-specific Status ID shall have a unique meaning, which shall be consistent across all products having a given Manufacturer ID.
Programs of this device can be updated via the RDM interface with proper tool named SC-NODE and RDM Program Tool. Connect the Lumina Strip to the output terminal of the SC-NODE then connect the SC-NODE to the PC, run the TCP/IP setting, see the following figures for details.
Lumina Strip TECHNICAL SPECIFICATIONS Power Thru/Input AC100~240V,50/60Hz IP Rating IP20 Power Consumption Weight 6.3Kg Fuse T3.15A 250V 5*20mm Dimension 1040(L)*130(W)*140(H)mm. Please note: Specifications and improvements in the design of this product and this manual are subject to change without any prior notice.