General Instructions; Physical Dimensions - Elation Lumina Strip User Manual

GENERAL INSTRUCTIONS

Thanks for your purchasing Lumina Strip lighting equipment, which is available in Warm White (WW) version.
The Lumina Strip is compatible of both DMX & RDM and with 10 channel LED intensity adjustable. Programs
can be updated via RDM interface. It is available in master and slave control connection.
install and operate.
For the optimum operation and best performance, please read the instruction in this manual carefully and
thoroughly.
WARNINGS
To protect against high electric shock and injury to person, DO NOT open or dismantle the unit.
After use, the front panel is extreme hot. Please wait at least 15 min. for absolute cool before touching it.
Otherwise, it causes the result of burning.
NEVER try to repair the unit yourself. Repair by unqualified people could cause damage or mis-operation.
This device is not suitable for direct mounting on normally flammable surfaces. To keep a minimum 0.2m
safety distance to any flammable materials.
DO NOT make any inflammable liquids, water or metal objects enter the unit.
This unit contains no user serviceable parts inside. This unit contains dangerous voltages, always remove
the power plug from the wall socket before any service operation and when not in use for a long time.
Earth connection is so essential.
Stop using the unit immediately in the event of serious operation problems and either contact your local
dealer for a check or contact us directly.

PHYSICAL DIMENSIONS

Lumina Strip
It is easy for users to
1