Layout Overview - Elation Lumina Strip User Manual

Layout Overview

Front Panel Overview
1
1. Lamp: Totally 10 LEDs* Warm White, 7W
Rear Panel Overview
6
RDM/DMX OUT
1=Ground
2=Data-
3=Data+
4,5=NC
Neutral
Earth
Live
POWER THRU(15A Max.)
9
1. LCD Display
This multi-function display will detail all DMX Address, Chase , Program, Speed activity that pertains to the
current operation mode of the unit.
2. Mode button
This button will call up the unit operation mode between DMX and Chase mode.
3. Menu button
This button will active the different functions in Receive and Chase modes.
Note: In the Chase mode, Menu key is used to only activate Chase Dimmer, Chase Program, Chase Speed,
Fade Time and Lamp Mode. While in the " Receive " mode, only used to only select DMX Address, Channel.
4. UP button
This button will increase the displayed value in the LED display.
5. Down Key
This button will decrease the displayed value in the LED display.
6. DMX Out
This connector sends your DMX signal through to the next unit.
7. DMX In
This connector accepts your DMX input signal.
8. Power Input:
AC100-240V~50/60Hz, Max15A. The supply power is input into your unit via this connector. Be sure to
always connect to proper voltage.
9. Power Thru:
AC100-240V~50/60Hz, Max15A. This connector sends the supply power to the next unit.
10. Fuse:
F3.15A 250V 5*20mm. These fuses prevent you from overloading damaging your unit. Be sure to always
replace with the exact same type fuse.
11. Power Switch:
Turn on/off the power supply.
4
MODE MENU DISPLAY
Address 001 -- 512
Channel 07 / 08 / 10 / 11 / 16
DMX
o
40 C No DMX OFF / Hold / Program
Glide OFF / ON
Program Full / 01-- 16 / Auto
0.2m
Speed 01 -- 100
Program
Master 00 -- 100
Lamp Mode Tungsten / LED
Fade Time 00 -- 100
Made in China
1
POWER
RDM/DMX
WARNING: / ATTENTION:
RISK OF FIRE AND ELECTRIC SHOCK
RISQUE DE CHOC ELECTRIQUE ET INCENDIE
MODE MENU UP DOWN
DRY LOCATIONS
EMPLACEMENTS SECS
NOT FOR RESIDENTIAL / HOUSEHOLD USE.
PAS POUR USAGE RESIDENTIEL / MENAGE.
FOR SAFETY INSTRUCTION AND MOUNTING OPTIONS REFER TO USER MANUAL
2 3 4 5
Lumina Strip
10
FUSE
Lumina Strip
Safety chain/cord Safety chain/cord
attachment point attachment point
POWER IN:
100-240V~, 50/60Hz
MINIMUM SAFE TY DISTANCE TO FLAMMABLE MATERIALS: 0.2m.
FUSE:
DISTANCE DE SECURITE AUX MATERIAUX COMBUSTIBLES: 0.2m.
T3.15A 250V 5x20mm
O
MAXIMUM OPERATING TEMPERATURE OF ENCLOSURE SURFACE IS 60 C
Power Consumption:
O
TEMPER ATURE DE FONCTIONNEMENT DE SURFACE ENCEINTE EST A 60 C
90W max.
FOR SUPPLY CONNECTION S USE WITH WIR E RATED AT LEAST 60 C O
POUR LES CONNEXIONS D'ALIMENTATION D E FIL D'UNE NOTATION
O
MINIMALE DE 60 C
POWER
11
7
RDM/DMX IN
1=Ground
2=Data-
3=Data+
4,5=NC
Live
Earth
Neutral
POWER IN(15A Max.)
8