Program Mode - Elation Lumina Strip User Manual

Program Mode:

Use the operation mode only when you are about to use your unit as a channel chaser among of the 07,
08, 10, 11,16 channel chasers. The unit has 16 built-in programs except for Auto and Full. Of course, you
can select any of these programs to chase for a more dramatic lighting show, and you can also control
the speed at which the set programs will be chased.
1. Setting your desired Chase Program:
Once you have activated the Chase Mode, you can tap the "MENU"
button to select and activate "Chase Program" menu. The chase pattern
is displayed in the LCD by "Program " followed by two digits 01~16 or
only "AUTO"& "FULL" appears. You can tap "UP" and "DOWN" button
to select any of them to run at a single time.
Selecting any program of Program01-16 will activate the selected
program; while selecting "Auto" will automatically play the built-in 16
chase programs. When select "Full" menu, all the LEDs will keep
lighting.
2. Chase Speed Menu:
Press "MENU' button to select and activate "Chase Speed"
menu. In this menu, you can adjust the program chase speed.
Use the "UP " and "DOWN" buttons to adjust the chase speed
from 001 thru 100. A set value of 100 will give you the fastest
chase speed(approx.1/10th of a second) . While a set value of
001 will give you the slowest chase speed (once every 30 second.).
3. Master (Intensity) Menu:
To adjust the output intensity, you must activate the
Chase Dimmer Menu as the previous step. Press "MENU"
button and select "Chase Dimmer" menu, the LCD will display
"Dimmer" followed by three digits.
Use the "UP" and "DOWN " buttons to adjust the light output
intensity between 000 ~ 100. A set value of 000 will give you
the weakest output intensity and a set value of 100 will give
you the full intensity.
4. Lamp Mode Menu:
Press "MENU" button and select "Lamp Mode" menu, the LCD will
display "LampMode Tungdten", user can press "UP" or "DOWN" button
to switch to "LampMode LED" menu.
5. Fade Time Menu:
Press "MENU" button and select "Fade Time" menu, the LCD will
display "FadeTime" followed by three digits, user can press "UP"
or "DOWN" button set the desired Fade time value from 000 to 100.
Lumina Strip
Program
01
MODE MENU UP DOWN
Auto
MODE MENU UP DOWN
Speed
001
MODE MENU UP DOWN
Speed
100
MODE MENU UP DOWN
Dimmer
001
MODE MENU UP DOWN
Dimmer
100
MODE MENU UP DOWN
LampMode
LED
MODE MENU UP DOWN
FadeTime
000
MODE MENU UP DOWN
11