DVS function
The DVS (Digital Vinyl System) function is used when a record or CD that contains a time code is played back, and the time code signal input
from the CD player is sent to the computer to be converted to a music signal before being input to the unit.
•
Check that the DVS software has been installed on the computer.
CD Player
USB OUT 1/2
3/4
5/6
7/8
USB IN 1/2
3/4
5/6
7/8
CH1 Input
CD Player
Record
Record
Player
Player
CH2 Input
CH3 Input
CH4 Input
1
Select USB Audio Setting
the UTILITY settings, and check that the settings
are DVS.
2
Select USB Audio Setting
UTILITY settings, and change the setting details to
CH.
Set the channel to be used with the P1–P4 of the
3
source selector.
USB Cable
Set the USB mode to device mode for the unit.
4
Computer
Set the DVS software in the computer.
5
6
Plays the player that is connected to LINE.
TIME
CODE
Data
Adjust the volume etc. for the connected line.
7
AUDIO Data
Preset Input Select in
•
DVS is the default setting
USB Assign in the
• Enter the TIME CODE data to the connected LINE. The
TIME CODE data is entered to the computer via the
USB cable. The data is converted to AUDIO data by the
computer, and then input to the various channels of this
device.
ENGLISH
19