Crossfader Start; Fader (Setting The Fader Curve); How To Adjust The Crossfader Torque - Denon DN-X1600 Owner's Manual

Crossfader Start

SOURCE SEL
1 Using the controls, select the source
from LINE1 CD, LINE2 CD, LINE3 CD and
LINE4 CD.
CROSSFADER ASSIGN
2 Set the
THRU/B) to A or B.
CROSSFADER START
3 Turn on the
Crossfader
4 Slide the all the way in direction
opposite the source you want to start.
(In the following example, startup is done with the
CD player connected set to Assign A.)
Set the standby mode on CD player.
5
CROSSFADER CONTOUR
6 Use the
the cross fader startup curve.
Crossfader
7
When the is slide in the opposite
direction, CD player play will begin.
switches (A/
switches.
control to control

FADER (setting the fader curve)

This adjusts the rise response of the channel fader/cross
fader.
Setting the channel fader curve
1
•
When the
left, the curve will have characteristics that rise gradually.
• When turned to the right, it will have characteristics that
rise sharply.
•
At the center position, curve characteristics between the
two will be produced.
•
The same curve characteristics apply to channels 1 to 4.
Setting the crossfader curve
2
•
When the
left, the curve will have characteristics that rise gradually.
•
When turned to the right, it will have characteristics that
rise sharply, and cut-in and cut-out operations will be
performed.
•
At the center position, curve characteristics between the
two will be produced.
channel fader CONTOUR
control is turned to the
crossfader CONTOUR
control is turned to the

How to adjust the Crossfader torque

Remove the rubber cap of the front panel.
1
Crossfader
2 Move the to the far right until the screw
head becomes visible.
Insert a screwdriver, and adjust the sliding torque.
3
•
When the screw is turned clockwise:
The sliding torque is increased so that the Crossfader
moves more stiffl y.
•
When the screw is turned counterclockwise:
The sliding torque is decreased so that the Crossfader
moves more easily.
After completing the adjustments, replace the
4
rubber cap onto the front panel.
NOTE
•
The Crossfader has a high-precision construction: As such, tightening
the screw with too much force or loosening it excessively may result
in damage or adversely affect performance.
Rubber cap
Screwdriver
ENGLISH
15