Page 2
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT alimentazione elettrica, scollegare la spina dalla relativa presa a muro. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 3
ATTENTION: • Evitate di esporre l’unità a temperature elevate. • La ventilation ne doit pas être gênée en recouvrant les ouvertures de la ventilation avec des Assicuratevi che vi sia un’adeguata dispersione del calore objets tels que journaux, rideaux, tissus, etc.
Page 4
EN61000-3-3. This product has been tested and found to Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux lois en vigueur sur la D’après les dispositions de la Directive 2006/95/EC, comply with the limits for a Class B digital mise au rebut des piles.
Adjust the level of Mic signal. Adjusts the headphone output level. SPLIT CUE button For buttons not explained here, see the page indicated in parentheses ( ). Source EQ controls • In the STEREO mode, the stereo sound of Contour the frequency response of the selected MASTER and CUE are fed to both ear cups.
• Connect these jacks to the balanced analog These stereo pair of unbalanced RCA jacks are a fast cut for scratching or to a slow fade for input jacks on an amplifier or console. inputs for a PHONO (RIAA) stage for magnetic mixing.
RCA pin pulag any effects into the stereo effect, if used. Connect your microphone(s) and monitor headphones. For BALANCED MASTER OUT Make sure all faders are at “zero” and the unit is Balanced Balanced (1/4” TS) Main balanced power amplifier off.
Playback Fader Start If the separately sold DN-S3500, DN-S1200 and etc. players are connected to FADER PGM1 or PGM2, they can started using the Channel fader or Crossfader, as long as the 3.5 mm stereo mini cords have been connected.
• When the CROSS FADER REVERSE is set to ON, the Crossfader’s operating direction is reversed. • Channel Fader Start and Crossfader Start for the same source will not operate simultaneously. You must select from either one. If both CH FADER START and CROSSFADER START A, B switches are ON, priority will be the Crossfader.
• EQ Control (Line): 3 Bands Control Range –30 dB to +10 dB (at 16 kHz), –38 dB to +10 dB (at 20 kHz) MID: –38 dB to +10 dB (at 1 kHz) LOW: –38 dB to +6 dB (at 60 Hz) •...
Page 13
PROFESSIONAL BUSINESS COMPANY TOKYO, JAPAN Professional Business Company, D&M Holdings Inc. http://www.dm-pro.jp Printed in China 00M0 8BZ85 1010...