Midi Command Output; Midi Output Channel Settings; Midi Clock Synchronization; Playback Using The Dvs Function - Denon DN-X600 Owner's Manual

SOURCE SEL
BEATo,p
TAP
CH1

MIDI command output

This unit supports USB MIDI output.
Almost all MIDI control functions and MIDI clocks are supported.

MIDI output channel settings

• The default MIDI setting channel is "CH1".
1
While pressing CH1 , press BEAT
The mode changes to the channel setting mode.
2
BEAT
Press o, p to select the MIDI channel to
output.
CH1 CH2 CH3
SEND/RETURN
• To cancel the settings, press
3
TAP
Press .
The MIDI output channel is set and saved.

MIDI clock synchronization

If the MIDI clock Input BPM signal is detected from the computer
when AUTO BPM mode is being used,
this unit automatically switches to operate using the MIDI clock input
BPM instead.
15

Playback using the DVS function

The DVS (Digital Vinyl System) function performs playback operations
of music files such as MP3 or WAV that are stored on the computer
by operating the software timecode signal from a turntable or CD/
Media player.
If this function is used, you can use the player's outstanding operability
to play back music files on the computer.
To use the DVS function, you need the following devices.
• Computer with DVS software installed
• Time code disc that accompanied the DVS software
• A CD/Media player or vinyl turntable

Connections

Audio Data
CH1 USB IN1/2
CH2 USB IN3/4
o, p.
CH16
.
L R
L R
Record
Player
Time Code Data
CH1 USB OUT1/2
CH2 USB OUT3/4
Time Code Signal
(Analog Audio Signal)
L R L R L R
L R L R
L R
CD Record CD
Player Player Player

DVS playback

Configure the DVS software beforehand.
• For details on how to configure the settings, see the instruction
manual for the DVS software.
1
Set the SOURCE SEL of the channel to be used to
"DVS".
• The mode switches to the selection mode for the input
source output to the computer.
• CH1 Input: Displays "1C or "1P".
• CH2 Input: Displays "2C or "2P".
("C" indicates CD input, "P" indicates PHONO input. )
• Switching between "C" and "P" for each channel.
BEAT
• CH1 Change: Press o.
BEAT
• CH2 Change: Press p.
2
TAP
Press .
The input source for each channel is set and saved.
3
Start the DVS software on the computer, and
prepare it for playback.
4
Playback the time code disc on the vinyl turntable or
CD player connected to the channel to be used.
• This unit outputs the input time code signal to the computer.
• The computer receives the time code signal, and starts
playback.
• For details on operations during playback, see the instruction
manual for the DVS software.
5
Adjust the volume etc. for the connected channel.