Effecter Operations; Selecting The Effector Units And Channels; Setting The Bpm; Setting The Beat - Denon DN-X1600 Owner's Manual

Effecter Operations

Selecting the effector units and channels

With the input channels:
EFX SEND
Using the button, select the effect units to be used. The
same effect can be selected for a multiple number of channels.
With the mic input and master output:
EFX INS
Using the button, select the effect unit to be used. The
insertion operation is initiated and just the one channel is selected.

Setting the BPM

1
When the auto BPM counter is off, press the
button for over 1 second to turn the auto BPM
counter on.
2 When the auto BPM counter is on, press the
TAP
button and release it immediately. The data
measured with the auto BPM function is locked.
•
The channel for which the effect unit was last selected
EFX SEND EFX INS
using the or button takes effect as the
channel used for the auto BPM counter measurement.
If the TAP button is pressed down for over 2 seconds,
3
the BPM value can be set directly by pressing the
BEAT
buttons.
The BPM value can be set by the interval during
4
TAP
which the buttons are repeatedly pressed.
TAP

Setting the beat

1
BEAT
Press the ,
of beats.
TIME
2 When the button is pressed, the mode is
changed to the time input mode.
The time can be adjusted by pressing the
buttons.
TIME
3 When the button is pressed again, the number
of beats setting mode is restored.

Selecting the effects

Turn the EFX SELECT controls to select the effect, and press the control
to enter the desired effect.

Turning the effects ON and OFF

Effect ON/OFF
When the buttons are pressed, the effect is turned ON
or OFF .
ENGLISH
buttons to set the number
BEAT
,
13