ENGLISH
Basic Operations
10
Basic Operations
POWER ON/OFF
1
Press the
switch to turn the unit's
power ON.
SOURCE SEL
2
Use the
controls to select the channels
from 1 to 4 of the sources to be used (LN1–LN4,
P1–P4, USB).
SEL
Use the
buttons of each LINE to select CD or
PHONO as the LINE input.
While checking the input level on the level meter,
3
adjust the input levels using the
controls.
4
Adjust the sound quality using the
controls (HI, MID, LOW).
Assignment of the channel signals can be switched
5
CROSSFADER ASSIGN
using the
Set these switches to the THRU position if the
Crossfader
is not going to be used.
6
Adjust the volume level using the
Crossfader
and
.
7
Adjust the output level using the
control.
channel LEVEL
channel EQ
switches.
Channel Fader
MASTER LEVEL