Kubota WSM OC60-E2 Workshop Manual page 60

OC60-E2, OC95-E2, WSM
Crankshaft Bearing I.D.
Crankshaft Side Clearance
Cylinder Liner I.D.
Difference Between I.D.'s at The Maximum and Minimum Wear
Position
LUBRICATING SYSTEM
Engine Oil Pressure
Clearance Between Inner Rotor and Outer Rotor
Clearance Between Outer Rotor and Pump Body
End Clearance Between Inner Rotor and Cover
Item
OC60-E2
OC95-E2
OC60-E2
OC95-E2
Item
At Idle Speed
At Rated Speed
S-8
Factory Specification
36.000 to 36.046 mm
1.4173 to 1.4191 in.
40.000 to 40.046 mm
1.5748 to 1.5766 in.
0.05 to 0.20 mm
0.0020 to 0.0079 in.
72.000 to 72.019 mm
2.8346 to 2.8354 in.
83.018 to 83.038 mm
3.2684 to 3.2692 in.
Factory Specification
49 kPa
(0.5 , 7 psi)
or more
147 to 490 kPa
(1.5 to 5.0 ,
21 to 71 psi)
0.15 mm
0.0059 in.
0.090 to 0.171 mm
0.0035 to 0.0067 in.
0.02 to 0.06 mm
0.0008 to 0.0024 in.
ENGINE
Allowable Limit
0.35 mm
0.0138 in.
72.10 mm
2.839 in.
83.10 mm
3.272 in.
+ 0.10 mm
0.0039 in.
0000009177E
Allowable Limit
98 kPa
(1
14.22 psi)
0.2 mm
0.0079 in.
0.24 mm
0.0094 in.
0.25 mm
0.0098 in.
0000009180E