Kubota WSM OC60-E2 Workshop Manual page 2

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism,
service and maintenance of OC60-E2, OC95-E2. It is divided into three parts, "General", "Mechanism" and
"Servicing".
General
Information on the engine identification, the general precautions, maintenance check list, check and maintenance
and special tools are described.
Mechanism
Information on the construction and function are included. This part should be understood before proceeding with
troubleshooting, disassembling and servicing.
Refer to Diesel Engine Mechanism Workshop Manual (Code No. 97897-01873) for the one which has not been
described to this workshop manual.
Servicing
Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting,
disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and
allowable limits.
All information illustrations and specifications contained in this manual are based on the latest product information
available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
Due to covering many models of this manual, information or picture being used have not been specified as one
model.
KUBOTA Corporation 2005
TO THE READER
February 2005
0000009675E