Kubota WSM OC60-E2 Workshop Manual page 28

OC60-E2, OC95-E2, WSM
The following special tools are not provided, so make them referring to the figures.
Flywheel Puller
Code No : 07916-30161
Application : Use for removing the flywheel from crankshaft.
Side Cover Oil Seal Guide (OC60-E2)
Application : The oil sealing guide is helpful in fitting the side
cover in position.
Material : S43C
Q Type
26.9 to 27.1 mm dia.
A
(1.060 to 1.066 in. dia.)
B 0.2618 rad (15 )
29.75 to 29.85 mm dia.
C
(1.172 to 1.175 in. dia.)
25.500 to 25.533 mm dia.
D
(1.004 to 1.005 in. dia.)
E 70 mm (2.755 in.)
F R 0.5 mm (R 0.020 in.)
G R 2 mm (R 0.079 in.)
C0.1 Chamfer 0.1 mm (0.012 in.)
C0.2 Chamfer 0.2 mm (0.0039 in.)
C0.3 Chamfer 0.3 mm (0.0079 in.)
G-13
GENERAL
0000009387E
0000009388E
G Type
26.9 to 27.1 mm dia.
(1.060 to 1.066 in. dia.)
0.2618 rad (15 )
29.75 to 29.85 mm dia.
(1.172 to 1.175 in. dia.)
22.300 to 22.333 mm dia.
(0.878 to 0.879 in. dia.)
70 mm (2.755 in.)
R 0.5 mm (R 0.020 in.)
R 2 mm (R 0.079 in.)
Chamfer 0.1 mm (0.012 in.)
Chamfer 0.2 mm (0.0039 in.)
Chamfer 0.3 mm (0.0079 in.)
0000009530E