Configuring Master Kdc Information - Symbol WS5000 Series System Reference Manual

3. Creating Kerberos User Accounts on page 4-5
4. Configuring Slave KDC Information on page 4-4

4.2.1 Configuring Master KDC Information

This procedure configures the switch to act as the master KDC authentication server for all Kerberos enabled
WLANs.
Note If using a master and slave switch configuration, ensure that each switch is
named appropriately (using the CLI) in order to avoid two devices with the same
name on the network.
To configure master KDC information, follow these steps:
1. From the WS5000 Series Switch GUI main window, click System Settings > Kerberos >
Configuration > KDC. The Kerberos Security Manager dialog box appears.
Figure 4.2 Kerberos Security Manager—Configuring the Master KDC
2. Select Master from the Configure As list.
3. Enter the Kerberos Realm where the KDC resides.
IMPORTANT! A DOMAIN NAME MUST BE ASSIGNED TO THE ETHERNET PORT
!
PRIOR TO ASSIGNING A REALM NAME TO THE KDC.
4. By default, "ethernet1" is selected as the wireless switch's interface that connects to the wireless
traffic. You can also select "ethernet2" if required.
5. Click Save to complete the Master KDC setup.
Using the WS5000 Series Switch GUI
(optionally)
4-3