Configuring Rule Management - Symbol WS5000 Series System Reference Manual

7-4
WS5000 Series Switch System Reference Guide

7.1.0.3 Configuring Rule Management

The Rule Management field within the Rogue AP Detection screen contains a
determining whether a detected AP can be approved or not. Each entry in the table works as an AP evaluation
rule. Specify a particular MAC address or ESSID, or optionally indicate any MAC address or ESSID will work.
Figure 7.3 Rule Management Section
1. Check the Authorize Any AP Having a Symbol Defined MAC Address
AP (which has a known Symbol MAC address) is an approved AP. This is helpful for rendering all Symbol
devices as approved without having to filter through the list of located addresses.
2. Define the following Rule Management options:
MAC Address Enter a valid MAC address used during the detection process,
or use a wildcard (*) to use any MAC address.
ESSID Enter an approved ESSID used during the detection process.
This field is only used when
not checked.
3. Select a rule and click the
4. Click the Delete All button to clear the entire rule list.
5. Click Apply from the Rogue AP screen to save your changes to the Rule List and Rogue AP screens.
6. Click Cancel from the Rogue AP screen to cancel all updates to the Rogue AP and Rule List screens.
Any ESSID
Del button to delete it from the table.
Rule List button for
box to indicate any Symbol
(on the same line) is