Snmp Configuration Section - Symbol WS5000 Series System Reference Manual

3-6
WS5000 Series Switch System Reference Guide
Table 3.4 Kerberos Configuration Section (Continued)
Option Value
KDCRealm <KDC realm name>
KDCInterface <KDC interface name>
KDCBackupHostname <xxx.xxx.xx.xx>
KDCBackupIP <xxx.xxx.xx.xx>
KDCBackupDomain <server name>
Note All Security Policies which are configured for Kerberos Authentication will automatically
be populated with the Master/Slave/Remote server's IP addresses if present in this file.

3.2.5 SNMP Configuration Section

The SNMP section of the command file contains settings for community attributes and trap actions, that are
used by SNMP-based network management tools to get/set MIB variables in order to configure the Wireless
Switch along with gathering and monitoring device status.
Table 3.5 SNMP Configuration Section
Option
SNMPCommunity[1-4]
SNMPCommunity[1-4]IP
SNMPCommunity[1-4]Perm
Notes
Kerberos realm name
The interface on which the KDC is configured (1 or 2).
Hostname of the backup slave.
IP address for the backup slave. If this IP address belongs
to any of the Ethernet ports and the hostnames match, the
switch is configured as a slave KDC.
Kerberos Master Hostname where the KDC resides.
Value Notes
<string> This is the SNMP community for the designated group
selection of [1..4]
<ip_address> SNMP community IP address.
<RO | RW permissions>