Configuring Ldap Authentication - Symbol WS5000 Series System Reference Manual

5.2.3 Configuring LDAP Authentication

If the Radius Data Source is using an external LDAP server (see
LDAP screen is used to provide data on the external LDAP server. Select
Configuration and click LDAP
There should be a group configured in the AAA server local database with the same group name as the LDAP
server. The policy in the AAA server for this group must have the same EAP enabled WLAN. Then, only the
mobile unit is authenticated by the Radius server.
Figure 5.6 LDAP Configuration
1. Configure the LDAP Configuration
with the LDAP server administrator for details on how to set the values if necessary.
Server name
LDAP Server IP
Port Number
Bind DN
from the Radius configuration screen.
field to enable the switch to work with the LDAP server. Consult
Enter the name of the external LDAP server acting as the data
source for the Radius server.
Enter the IP address of the external LDAP server. The server
must be accessible from the WAN port or from an active
subnet on the switch.
Enter the TCP/IP port number for the LDAP server acting as a
data source. The default port is 389.
Specify the Bind Distinguished Name —the distinguished
name to bind with the LDAP server.
Configuring User Authentication
Configuring the Radius Server on page
System Settings -->
5-7
5-1) the
Radius