Axon Hd Pro; Mounting The Server - High End Systems Axon HD User Manual

CHAPTER 2
Setup and Configuration

Axon HD Pro

The Axon HD back panel provides ports for:
• DMX Adaptor for 5-pin DMX Data In and Data Out (see Setting up a Standard DMX Link on
page 9 for more information)
• Ethernet/Artnet to connect to other Axon HD, Axon, DL.3 and DL.2 units and your
computer for accessing the CMA application (see Using an Ethernet Link on page 9).
• Nine USB ports for connecting peripheral hard drives, flash drives, keyboard or mouse.
• Audio Out port
• Four GFX ports for displaying server output.
• DVI-D port to a display monitor for viewing CMA.
• VGA port to an display monitor option for viewing CMA.
• Two sets of SDI input and outputs plus a reference input on the Video Capture Card.
USB 2.0
DMX512
Note: To initialize the motherboard graphic card output, one of the Display
Output ports and one of the Server Output ports must have devices
connected when starting the media server. When only one port is
connected, it defaults to display the graphics engine output and will not
display the CMA screen.

Mounting the Server

The Axon HD media server mounts in any standard 2U rack.
8
DMX IN DMX OUT
USB 3.0 GFX Out Video
Display Capture
Audio Port CMA Card
Out DVI-D
Axon HD Media Server User Manual