Manipulating The Mesh Display - High End Systems Axon HD User Manual

The selected or new warp will appear in the center panel. The panel on the right of the screen
displays the warp editing fields.

Manipulating the Mesh Display

Once a warp mesh has been selected or a new warp created, you can use the mouse to:
• Orient the mesh shape within the viewing area of the screen
— Move the scroll wheel of the mouse to zoom the in and out on the display area.
— Hold down the SHIFT key and move the scroll wheel to position the display up and down.
— Hold down the CNTR key and move the scroll wheel to position the display right and left.
• Select one or more control points by holding down the left mouse button and dragging over
the points you want to manipulate. The selection will 'Latch' to the control point
• De-select the point when you are finished editing it, using the Right Mouse Button.
2
Display Panel Editing Panel
Axon HD CMA Warp Editor