Horizontal Cylinder - High End Systems Axon HD User Manual

Horizontal Cylinder

When you select the Horizontal shape, you
can set the following:
Select Inside Surface if you want to display
the sphere as a concave surface.
You can choose the x, y and z coordinates as
the cylinder's centerpoint.
Define the Latitude to choose a portion of the cylinder.
Horizontal Cylinder: default geometry
Horizontal Cylinder:
Centre [x],[y],[z]
Latitude (Deg) Start
Note: Once you click New, the Curved Geometry options cannot be changed
unless you click Reset and start a new Cylinder mesh.
Axon HD CMA Warp Editor
1 1 0
70.00 End 105.00
5